HONEY WELL QUARTZ BANGER – 45° DEGREE | YL

Understanding the features of your banger helps you get the most out of every dab. Here is a quick breakdown of what makes our Honey Well 45° YL a top performer and how each feature improves your experience.

• A 45° angle is essential for beaker bongs and other rigs with angled joints.
• The beveled edge is a premium feature that makes your carb cap more effective.
• An opaque bottom provides better thermal performance for more flavorful dabs.

Every detail of the Honey Well banger is engineered for a better dabbing session. From the seal to the heat retention, these features work together to unlock the full potential of your concentrates.

Why Does The Beveled Edge Provide A Better Seal?

A beveled edge creates a wider, angled surface for your carb cap to rest on. Unlike a flat top banger, this design guides the cap into a secure position, forming an airtight seal with little effort. This simple feature prevents vapor from escaping, ensuring you inhale all of the vapor and none goes to waste.

What Are The Benefits Of An Opaque Bottom?

The opaque quartz bottom isn't just for looks. It has a unique structure that allows it to heat up faster and retain its temperature longer than standard clear quartz. This means you can dab at lower temperatures for more flavorful hits and spend less time reheating between sessions.

What Does The 45 Degree Angle Do For My Rig?

If your rig's joint comes out at an angle, like on many beaker and bent-neck styles, you need a 45-degree banger. Using a 90-degree banger on an angled joint would make the bucket tilt, risking spills. The 45-degree neck on this Honey Well banger ensures your dabbing surface stays perfectly level for safe and efficient use.

• The beveled edge is designed for maximum efficiency with bubble and directional carb caps.
• Opaque quartz is a functional upgrade for any user focused on flavor.
• A 45° banger is a required component for angled-joint water pipes.

A 45° quartz banger is not interchangeable with a 90° one; it's a specific tool for a specific type of rig. You should choose this 45° Honey Well banger if your water pipe or dab rig has a joint that is angled at 45 degrees from the main chamber.

This design is most commonly found on beaker-style bongs and rigs with curved or "bent" necks. Using a 45° banger on these pieces ensures the bucket stays upright and parallel to your table. This is critical for evenly heating your concentrates and preventing them from sliding down the banger's neck.

• Ideal for beaker bongs and rigs with angled downstems.
• Prevents concentrates from pooling and being wasted in the banger neck.
• Creates a stable, level surface for terp pearls to spin effectively.

Follow these steps to get a perfect dab every time with your Honey Well banger. Remember that the opaque bottom heats quickly, so your timings may be shorter than with a fully clear banger.

1. Clean First: Before your first use, clean the banger with a cotton swab and isopropyl alcohol to remove any dust.
2. Heat the Banger: Use a butane torch to heat the opaque bottom of the banger for about 20-30 seconds. Avoid heating the joint directly.
3. Cool Down: This is the most important step for flavor. Let the banger cool for 30-45 seconds. The ideal temperature is between 350-450°F.
4. Apply Concentrates: Use a dab tool to apply a small amount of concentrate to the inside of the bucket.
5. Cap It: Immediately place a carb cap over the beveled edge to trap the vapor.
6. Clean While Warm: After your dab, use a cotton swab to wipe out any residue while the banger is still warm. This prevents "chazzing" or buildup.

• Opaque quartz requires a shorter cooldown time than clear quartz.
• Always clean the banger with a cotton swab after each use while it's still warm.
• Pair this banger with a bubble cap to take full advantage of the beveled edge seal.

Choosing the right banger depends on what you value most in a session. Our Honey Well banger is a versatile daily driver, but here's how it compares to other popular styles you might see.

• Offers premium features like a beveled edge and opaque bottom.
• Easier to clean and maintain than more complex bangers like terp slurpers.
• Strikes a great balance between ease of use and high-end performance.

Keeping your Honey Well banger clean is the secret to getting fresh, flavorful dabs for years to come. Proper maintenance prevents buildup and protects the quality of the quartz.

What Is The Best Way To Clean The Banger After Each Use?

The most effective method is called "Q-tip Tech." Right after you finish your dab, while the banger is still warm but not red hot, use one or two cotton swabs to wipe out all the remaining residue. For a deeper clean, you can dip a swab in isopropyl alcohol and wipe the interior, then follow up with a dry swab.

How Can I Remove Tough Residue Or Chazzing?

If you have stubborn, dark buildup (chazzing), you can do a deep clean. Gently heat the spot with your torch for a few seconds to loosen the residue, then carefully scrape it with a dab tool. For a safer method, soak the banger in a container of isopropyl alcohol for a few hours, then rinse it well with warm water.

• Cleaning a warm banger with a cotton swab is the best way to prevent buildup.
• Avoid overheating or dropping a hot banger into cold alcohol to prevent thermal shock.
• Regular maintenance ensures your banger delivers pure flavor every time.

Get the most out of your new Honey Well banger with these essential accessories and alternatives. All are available from us with fast shipping in the U.S.

• Carb Caps: Find the perfect bubble cap to seal your beveled edge banger.
• Terp Pearls: Add a few 3-4mm pearls to help distribute heat and vaporize concentrates.
• Cleaning Supplies: Stock up on isopropyl alcohol and cotton swabs to keep your quartz looking new.
• Need a 90° Version? We also offer the Honey Well Banger for rigs with vertical joints.